Buhler 595 Manuale Utente

8 Safety Decals These decals are located as shown on the Decal Location diagram and the Sub-Frame Assembly diagram. 1. Read Operator's Manual

10 General Instructions and Information As with any piece of equipment, the care with which your loader is operated and maintained will greatly a

11 Operation and Maintenance GENERAL Refer to tractor Operator’s Manual for Operating information on the tractor’s hydraulic system. Hydraulic

12 Operating Suggestions for Loading When handling heavy loads, be sure to lower lift arms slowly. This is known as feathering the hydraulic lever

13 Operating Suggestions For Backfilling DO THIS! When backfilling approach pile with a flat bucket. Leave dirt in bucket. Dumping on each pass w

14 Attaching the Loader to Your Tractor 1. Position the tractor as centrally as possible and drive, using lowest gear possible, into the loader fr

15 Attaching the Loader to Your Tractor (Continued) 6. When the hook is lined up, dump or roll back the bucket to lower or raise the subframe upri

16 Removing the Loader from Your Tractor WARNING! When removing the loader, it must be fitted with a bucket or other suitable attachment to give

17 Removing the Loader from Your Tractor (Continued) 4. Roll back the bucket slightly and simultaneously extend or retract the lift cylinders to

PRINTED IN CANADA WARRANTY REGISTRATION AND POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months from original date o

PROBLEM POSSlBLE CAUSE REMEDYLoader slow and/or will not dump. Quick couplers leaking. Check connections and compatibility orreplace.Hydraulic oil too

19 General Notes and Instructions to the Operator Regarding ALLIED TSL Loader Operations 1. The true self levelling system (TSL) utilizes mechanica

Item Part No. DescriptionRegular QuantityTSL QuantityS595 QuantityS595 TSL Quantity1 25440 595 Sub Frame Weldment Left1-2 25441 595 Sub Frame Weldment

Item Part No. Description 595 595 S1 25442 595 Main Frame Weldment 1 -1 25443 595 S Main Frame Weldment - 12 24296 Quick Attach Weldment Left 1 13 242

Item Part No. Description 595 TSL S595 TSL1 24729 595 TSL Mainframe 3.0 DIA. Lift 1 -1 24737 S595 TSL Mainframe 3.0 DIA. Lift-12 24717 Quick Attach Le

26 595, S595 Hydraulic Plumbing Diagram

Item Part No. Description Qty.1 24458 2.5 Dia. X 20.63 Cyl. Assy. Bucket 22 24454 2.5 Dia. X 28.50 Cyl. Assy. Lift 23 812973 3/8 x 12" Hose 3/4 M

595 Hydraulic Farm Loader Operator’s Manual Table of Contents Section Introduction and Identification Safety and Pre-use Information Ope

Item Part No. Description3.0 Dia. Cyl. Quantity1 24726 3.0 DIA x 22.0 Cyl. Assy. Bucket 22 24408 3.0 DIA x 28.5 Cyl. Assy. Lift 23 812069 Tee 3/4-16MJ

30 595, S595, 595TSL, S595TSL Hydraulic Cylinder Assembly Bucket Cylinders Bucket Cylinders TSL Bucket Cylinders Lift Cylinders Lift Cylinde

Buhler Manufacturing “a partnership” 1260 Clarence Ave Winnipeg, MB. R3T 1T2 Ph.: (204) 661-8711 Fax: (204) 654-2503 www.buhler.com Printed in

3 Pre-delivery Check List Before delivering this equipment please complete the following check list.

4 Loader Identification Diagram (HS

5 Hydraulic (Hose Kit) Identification Diagrams Hose Kit “A” Loader Powered by the tractor remotes. Consists of four hoses leading from loader tu

6 Safety• Never work beneath raised loader unless it is securely supported. The following are instructions for the Lift Lock Supports; -DO NOT US

7 Important Precautions ROLL-OVER HAZARD To prevent serious injury or death:Move and turn tractor at low speed.Carry load no higher than